K40,K42, K44 Carbide Standard Gear Hob with Topping or Non-ToppingGrade K40, K42, K44 carbide hobs a...
K40/K42 Solid Carbide Gear Hob Cutter for Oil-Cooling Cuttingbase material: K40, K42, cold heading d...
Low Speed Bore Type Solid Carbide Hob for Soft Tooth Oil Cuttingbase material: ordinary tungsten all...
G50/G55 High Speed Carbide Gear Hob with AP Coatingbase material: carbide G50 or G55bore type gear h...
High Speed Dry Cutting Hob with Carbide K44+APbase material: solided cemented carbide from Konrad, G...
GB Standard Gear Hobs with M1-M10gear hob for finishing cut, pre-shaving, pre-grindingtooth profile:...
GB 6083 Standard Gear Hobs with M2+TiNtooth profile is GB 6083 standardmodule rangle: m1-m10, 20° PA...
Disk Type Shaper Cutters with GB 6081these shaper cutters are 20° PA, non-topping finishing cutters...
Deep Counterbore Type Shaper Cutters with GB 6081Module range: m1-m8, diametral pitch: Dp 3-24these...
Taper Shank Type Shaper Cutters with GB 6081These shank type shaper cutters are 20° PA, non-topping...
Disk Type Shaper Cutters with DIN 1825These shaper cutters are 20° PA non-topping finishing cuttersT...
Deep Counterbore Type Shaper Cutters with DIN 1826These shaper cutters are 20° PA, non-topping finis...
Taper Shank Type Shaper Cutters with DIN 1828These shaper cutters are 20° PA, non-topping finishing...
Disk Type Shaper Cutters with JIS B 4356These shaper cutters are 20° PA, non-topping finishing cutte...
Deep Counterbore Type Shaper Cutters with JIS B 4356these shaper cutters are 20° PA, non-topping fin...
Taper Shank Type Shaper Cutters with JIS B 4356They are non-topping finshing shaper cutters.20° PA,...
GB Standard Gear Shaving Cutters with M2~M8These shaving cutters are made according to profile of Ch...
Bore Gear HobMaterial HSS M35, S390, S290, MC90 + AlcronaMaterial Tungsten Carbide + AlcronaPlease g...
HSS Module Gear Shaving Tool ...
M42, M35, M2 Timing Pulley Hobs with TiN, AP CoatingAll standards of timing belt hobbing are availab...
S390, ASP52, M42, M35, M2 Chain Sprocket HobsAll standards of chain gear hobbing are available in st...
DP and Module Worm Gear HobsWorm gear hobs are stocked according to standard needs.Between 1-8 modul...
HSS M2, M35 Spline Hobs for Spline ShaftsSpline Hobs are supplied for generating parallel or angular...
Module and DP Gear Hobs with 14°30′ – 45°Module : 0,1 – 40DP : 120 – 0,75PA : 14°30′...
